09-28-2008 03:55 AM - edited 03-15-2019 01:35 PM
i need to configure sip client in ccme
i know the commands but i dont know how to process the commands and working logic ..so some one plz help me in this..and the x-lite ll work with ccme
09-28-2008 05:01 AM
hi cyril
the following link very helpful regarding ur case
Cisco CallManager Express (CME) SIP Trunking Configuration Example:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
good luck
if helpful rate
10-07-2008 04:17 AM
hi,
thank you for ur kind reply..
i have one queastion
each cisco ip phone will act as sip server
or the router will act as sip server..
10-12-2008 02:20 AM
zeuscyril, the router will be the 'server'
Also take a look at this guide from the guys at uc500.com author Tony Huynh.
http://uc500.com/files/CME-SIP-Config-Guidev3%20Oct%202007.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
