Adding memory to a Cisco 2620?

Unanswered Question
Sep 28th, 2008


I wnat to upgrade the memory on my Cisco 2620 router. It looks like it has 48mb, is this possible, can you get to 24mb dimms or is it using a 32mb and 16mb?

Does Dimm 0 and Dimm 1 have to be the same size?

Here is my config, I want to get an IOS that supports VPN's, but I think I need around 98mb.

Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(29b), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Mon 30-Jul-07 17:18 by kellythw

Image text-base: 0x8000808C, data-base: 0x81120AC0

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Router uptime is 2 hours, 13 minutes

System returned to ROM by power-on

System image file is "flash:c2600-is-mz.122-29b.bin"

cisco 2620 (MPC860) processor (revision 0x200) with 45056K/4096K bytes of memory.

Processor board ID JAD05060VMH (1277056474)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Router#sh flash:

System flash directory:

File Length Name/status

1 10323912 c2600-is-mz.122-29b.bin

[10323976 bytes used, 6453236 available, 16777212 total]

16384K bytes of processor board System flash (Read/Write)


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion