Overhead Paging Call Blast

flash2200 · ‎09-28-2008

Hi all,

I have a customer wanting to interface their overhead paging with their new CUCM 6.1 IPT system. They have the overhead paging split into four zones and I have a 4 port FXO card setup with one analog line to service each zone. The customer wants to be able to call each zone individually via a different number which is easy enough but they also want another number which if called would trigger the paging over all 4 zones at the same time. I believe this is called "Call Blast" but I don't think its supported on CUCM? Any ideas on the best alternative option to set this up?

TIA!

Rob Huffman · ‎09-28-2008

Hi Steven,

This type of setup is available in most Paging Control systems. The name would be something like "all Zones" or "Paging Override". These would bridge all 4 Zones together for an "all Page".

So, have a look at the Paging system for this config as it is not generally a CCM setup. If you let us know what you are using we can probably check out the specs and come up with a solution for your customer :)

Hope this helps!

Rob

flash2200 · ‎09-28-2008

Thanks Rob! In retrospect that does make sense they would already have the feature built into the paging system.

Rob Huffman · ‎09-28-2008

Hey Steven,

You are most welcome my friend! Let us know how this works out.

Cheers!

Rob