Simplified guest access

Unanswered Question

Reading the Cisco Guest access deployment senarios again becomes a little unclear.


Lets assume 3 scenarios.


1 Small office

4 access points

1 2106 controller


This will give simpl guest access terminate the guest vlan in an adsl router and a web auth page and use the wlc to manage guest client access


2 Multiple small offices

2 offices each with 2 APs

2106 in each och office


The guest access woul have to be terminatin a 4402 12 as I cant use 3rd 2106 to terminate and originate the guest access? The 2106s locally will pass the guest access through.


3 Large enterprise.


5 4404 controllers


Would I simply use a 4402 to terminate and distribute the guest acccess as a central guest database.


I have deliberately not mentioned DMZ as to simp[lify the scenarios.


Thanks



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Mon, 09/29/2008 - 18:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

First look at the traffic flow. If you have a decent conection back to the central location and this is the only internet connection, then tunneling traffic back via local or h-reap would be the best bet. If the offices have thier own internet dsl, adsl, etc, then maybe sending the traffic out at the local sites would be your best choice. It also goes hand in hand with how you will desing the wlan for their internal users and devices not including guest. You can design this many ways, but it will come down to if you place wlc's in each location vs. centralized deployment.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode