Hi Guys,
Having a problem with a CUE module :
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
[BOOT-PHASE2]: entered
[BOOT-PHASE2]: build date: Thu Oct 24 20:31:20 PDT 2002, build number 2
[BOOT-PHASE2]: directory verified ok
[BOOT-PHASE2]: examining phase3 boot-rom: 'default_bootrom'
[BOOT-PHASE3]: entered
[BOOT-PHASE3]: version 1, built Thu Oct 24 20:25:05 PDT 2002
[BOOT-PHASE3]: directory verified ok
[BOOT-PHASE3]: enter `***' for rescue image: ***[BOOT-PHASE3]: rescue image: 12
sectors
[BOOT-PHASE3]: loaded 12 device sectors to 0x2000000!
checksum: bzimage_start (2000400) + hdr->bzimage_len (-168430091) - sysimgaddr (
2000000) > nr_bytes (1572864)
[BOOT-PHASE3]: rescue image corrupt!
[BOOT-PHASE3]: PANIC
*Sep 26 15:21:21.595: %LINEPROTO-5-UPDOWN: Line protocol on Interface Service-En
gine1/0, changed state to up, halting.
[BOOT-PHASE3]: Contact Cisco Technical Support
AMG_RTR#service-module service-Engine 1/0 status
Service Module is Cisco Service-Engine1/0
Service Module supports session via TTY line 66
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
Cannot open a session to the module and have tried to recover using the *** as in the other postings but still not working. Also tried shutting down the module and reloading still nothing.
Any help appreciated apart from get a new one hehe...