09-29-2008 07:04 AM - edited 03-11-2019 06:50 AM
Hi, wonder if anyone could help with this issue... we have recently upgraded to version 8 from version 6 on PIX
When connected to Oracle servers over a VPN tunnel it bombs out with errors, looking on the PIX log (attached) showed a reassembly limit is exceeded. I've looked on the web and found a work around is to remove 'inspect rstp'
i have done this but the errors persists
It did'nt happen on version 6.3 any ideas?
Solved! Go to Solution.
09-29-2008 07:17 AM
Please remove " inspect sqlnet " too.
Do rate if it resolves the issue.
Regards,
Sushil
09-29-2008 07:14 AM
Please provide a running configuration of your device also.
You can try this command:
set connection embryonic-conn-max 16384
09-29-2008 07:17 AM
Please remove " inspect sqlnet " too.
Do rate if it resolves the issue.
Regards,
Sushil
09-29-2008 08:12 AM
Jmoss..removing Inspect wont help..you are getting reassembly limit exceeded error because tcp-proxy function/Inspection is enabled..and as TCP Proxy is mandatory for certain inspected protocols SIP, Skinny, H.323,RTSP disabling it wont help...
your problem is this CSCsl15229
Rate if this was helpful...
09-29-2008 08:13 AM
Jmoss..removing Inspect wont help..you are getting reassembly limit exceeded error because tcp-proxy function/Inspection is enabled..and as TCP Proxy is mandatory for certain inspected protocols SIP, Skinny, H.323,RTSP disabling it wont help...
your problem is this CSCsl15229
Rate if this was helpful...
09-29-2008 10:30 AM
ok great at least we are onto something. I've searched the bug toolkit and it says that the workaround is to not inspect rstp which i've tried but to no avail
we are on code 8.0(4), I only want to cure this one bug as everything else is fine. What version should we move to?
09-29-2008 08:49 PM
this was a feature enhancement request...you may go to any of these codes..
8.0(4.1)
8.2(0.141)
8.1(101.6)
8.1(1.10
plz rate if it helps !
09-30-2008 12:37 AM
Guys i've removed the inspect sqlnet and it's ok now
we will however move to a later version of code asap to fix this bug
thanks all for your help with this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide