CSM VPN discovery

Unanswered Question
Sep 29th, 2008

I have a 5520 as a Remote Access and L2L HUB and spoke VPN concentrator. I also have a wireless DMZ that terminates VPN tunnels. When i go to discover my hub an spoke VPN topology it wont discover because the crypto map is applied to multiple interfaces...how can i over ride this?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tstanik Fri, 10/03/2008 - 08:32

This document describes how to configure Dynamic Multipoint VPN (DMVPN) and Easy VPN with Xauth on the same router. This setup caters for DMVPN spokes to be dynamically addressed. Internet Security Association and Key Management Protocol (ISAKMP) profiles provide the ability to separate the authentication methods of dynamically addressed DMVPN spokes or Easy VPN Clients.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801eafcb.shtml

Actions

This Discussion