jwadleigh Tue, 09/30/2008 - 10:14
User Badges:

Hi!


If there is no VLAN specified for a particular SSID, then traffic on that SSID will not be tagged. As a result, if there is only one VLAN on the AP, the traffic goes on that VLAN. If multiple VLAN's are present (i.e. the AP is connected to a trunk port on the switch), then the traffic will be placed on the native VLAN of the trunk.


I hope this helps!

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode