Clientless SSL VPN - works will local auth but not with RADIUS

Unanswered Question
Sep 30th, 2008


I've configured Clientless SSL VPN but I can't get it to work with RADIUS authentication. Standard client VPN's and local ASDM access works OK with RADIUS. But when I connect through Clientless SSL VPN only my username with my local password works.

Has anyone any idea what the problem is?



ASA ver 8.0(3)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
hadbou Mon, 10/06/2008 - 10:41

Check if you have enabled RADIUS authentication on ASA while configuring the SSL vpn client.If not enable Radius authentication

Farrukh Haroon Thu, 10/09/2008 - 00:39

You need to specify the authentication server group in the tunnel group for SSL.



ccpagel Thu, 10/09/2008 - 05:20

I resolved the problem by configuring an Alias on each of the Connection Profiles and by ticking the box which says "allow user to select connection at login identified by alias from the table above".



This Discussion