Goutam Sanyal Tue, 09/30/2008 - 22:09
User Badges:
  • Silver, 250 points or more

Hi Hector Sandoval,

As per my knowledge you can configure from 1 to 2147483647, and I have bundled 3 individual (Same ISP, 1x64 Kbps and 2x128Kbps) link perfectly.



Pls rate if it helps u!

satish_zanjurne Tue, 09/30/2008 - 23:38
User Badges:
  • Silver, 250 points or more


1.Strangely i found the multilink group range starting from 0 till 214748364. I have mentioned the link also below for reference.


2.But when i tried using command

"interface multilink 0" on Cisco 3745 with 12.4 IOS , it gave error , & using tab it shows the range as mentioned by Gautam 1 to 2147483647

3.Also i found the option "Multilink PPP Minimum Links Mandatory" to form multilink ,as well there is option of maximum links in a multilink bundle.

commands for same are

"ppp multilink max-links links"

"ppp multilink min-links links"

And here it shows the range as 0 to 255, it means these number members of links can be added in a multilink group.

4.Well , practically i have added 4 links suceessfully on Cisco 10000 router.I am sure we can add more links.

5.None of the command referecne mentions the exaxt number of members , which can be added in a single multilink bundle.

HTH..rate if helpful..

hectorsandoval Wed, 10/01/2008 - 04:58
User Badges:

I need to create another Multilink2 with 2xE1 for a new client. I want to be sure this is possible before we buy the hardware.

Also on my 2801 I don't see any Multilink 0 as you reference on pint 2, this is what I see:

rt-2801(config)#interface multilink ?

<1-2147483647> Multilink interface number

satish_zanjurne Wed, 10/01/2008 - 06:23
User Badges:
  • Silver, 250 points or more

I think picture is clear now..you should be able to create one more multilink then..


This Discussion