VPN Client will not browse when connected via 877w

Answered Question
Oct 1st, 2008

Hi,


I have set up a Cisco 877w and it works fine for web access


VPN Client on my laptop connects through the 877w and authenticates to my remote work ASA5510 firewall.


Problem is after connecting to the ASA I cannot connect to anything to the internal work network (10.0.0.0/24), ping, RDP etc comes back with no response.


I have attached the config, can anyone tell me what I am missing, an access list maybe?


Thanks for your help

Chris


Attachment: 
Correct Answer by singhsaju about 8 years 4 months ago

This router is doing PAT/NAT , blocking Ipsec.


Enable Nat traversal on the remote ASA.


isakmp nat-t or crypto isakmp nat-t


HTH

Saju

Pls rate helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
singhsaju Wed, 10/01/2008 - 10:09

This router is doing PAT/NAT , blocking Ipsec.


Enable Nat traversal on the remote ASA.


isakmp nat-t or crypto isakmp nat-t


HTH

Saju

Pls rate helpful posts

Actions

This Discussion