SSID taking long time to Show up in Client Wireless Network List

xtechdata · ‎10-01-2008

I've just installed a Cisco 1240AG Wireless Access Point with a single High Gain Antennea AIR-ANT24120 connected on the Right (Primary) Connector, and Trasmit & Receive set to the right (Primary)connector. Everything seems to be working fine, but it seems that the wireless PC's have to refresh the Available Wireless Networks several times before the SSID finally shows up. This is happening to all the PC's, but once it finds it, it works great and has exceptional range. Is there anything I can configure or upgrade to make it so the Wireless Network shows available any faster?

System Software Filename: c1240-k9w7-tar.124-10b.JA

System Software Version: 12.4(10b)JA

Bootloader Version: 12.4(13d)JA

Report Inappropriate Content · ‎10-07-2008

You may try changing the radio card setting in the wireless PC.If your platform in windows then the following URL may help you:

http://www.cisco.com/en/US/docs/wireless/base_station/340/configuration/guide/Base_apC.html