Configuring pix 501 authentication pppoa

Unanswered Question
Oct 1st, 2008
User Badges:


I have linksys wireless modem/router my network currently working fine on this device. I bought Cisco pix501. i have configured the PIX.

ip address outside pppoe setroute

vpdn group Internet request dialout pppoe

vpdn group Internet localname [email protected]

vpdn group isp request dialout pppoe

vpdn group isp localname [email protected]

vpdn group isp ppp authentication mschap

vpdn username [email protected] password xxxxxx

vpdn username vpn password 123456


The problem is encapsulation is pppoa. I dont know how to configure the pix 501 if the encapsulation pppoa. Could anyone assist me how to configure.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Marshall Wed, 10/01/2008 - 06:03
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

The pix 501 does not have an ATM interface so it cannot do PPPOA. If you need to do PPPOA you need to look at a router instead.



This Discussion