Mac, VM XP Pro, Cisco VPN, and Printing.

Answered Question
Oct 1st, 2008

I have an end user running a Mac with a VM XP Pro Machine that connects to our corperate VPN. This part works just fine. The problems come up when he tries to print to a local network printer. The job just sits until he disconnects from the VPN and then it prints just fine. Does anyone know what to do to fix this? I have little or no MAC knowledge.


Regards,

Dan

Correct Answer by singhsaju about 8 years 4 months ago

That could be the reason why printing is not working. The printing traffic is actually going to vpn tunnel as split tunnel is not configured.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
singhsaju Wed, 10/01/2008 - 09:40

You can check if split-tunnel is enabled or not. If not then enable it .


HTH

Saju

Pls rate helpful posts

Correct Answer
singhsaju Wed, 10/01/2008 - 09:49

That could be the reason why printing is not working. The printing traffic is actually going to vpn tunnel as split tunnel is not configured.



ddevecka Wed, 10/01/2008 - 10:01

That's what I figured but I hoped someone would have dealt with this in the past and have a work around other than split tunneling.


Thanks,

Dan

Actions

This Discussion