Solved: Trying to set up VPN Client with Hairpinning on ASA5510

shaw.chris · ‎10-01-2008

Hi,

I am trying to set up our ASA5510 so users can connect to our work LAN and browse the Internet as well.

I've followed the Cisco guide, I connect and I'm given a 192.168.10.x address as needed but I can not connect to anything on our 10.0.0.0/24 work network nor surf the Internet.

Could someone please check my config and see what is wrong, there is also a L2L vpn on here to a 192.168.3.0 network but that works without issues

Many Thanks,

Chris

singhsaju · ‎10-01-2008

Hello Chris,

Add following access-list statement.

access-list INSIDE_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 192.168.10.0 255.255.255.0

And for hairpinning the internet traffic add following command:

same-security-traffic permit intra-interface

Check and post results.

HTH

Saju

pls rate helpful posts

View solution in original post

shaw.chris · ‎10-01-2008

.

singhsaju · ‎10-01-2008