From multimode to single mode context

Answered Question
Oct 1st, 2008
User Badges:
  • Silver, 250 points or more

How easy it is to go from multimode to a single mode?

Correct Answer by suschoud about 8 years 7 months ago

You assumption is correct.Keep a copy of " sh tech " command which would include running config. from all the contexts.



Regards,

Sushil

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
suschoud Wed, 10/01/2008 - 10:35
User Badges:
  • Gold, 750 points or more


ASA-5520-SSM-Multiple(config)# mode single



Run this in system context.



Regards,

Sushil




Tshi M Wed, 10/01/2008 - 10:37
User Badges:
  • Silver, 250 points or more

Hi Sushil,


What would be the impact if any? I am assuming here that i am going to loose my configuration.

Correct Answer
suschoud Wed, 10/01/2008 - 10:40
User Badges:
  • Gold, 750 points or more

You assumption is correct.Keep a copy of " sh tech " command which would include running config. from all the contexts.



Regards,

Sushil

Jon Marshall Wed, 10/01/2008 - 10:54
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Sushil


From memory when you switch from multiple mode to single mode does it not copy the admin context into the running config for single mode is this only on FWSM ?


Jon

suschoud Wed, 10/01/2008 - 10:58
User Badges:
  • Gold, 750 points or more

Yes,

only the admin context config is saved,Not the rest of the contexts if they have been created.The better approach is to keep a " sh tech " so that you have " sh run " of all the contexts.Atleast,that's what we do in TAC. :)



Regards,

Sushil

Actions

This Discussion