IP SLAs

Unanswered Question
Oct 3rd, 2008
User Badges:

I'm using IP SLAs on a local router to track some interfaces on other routers but the status of the tracking state when

any monitored interface goes down (while testing) it never comes up because static routes pointing to these routers are

tracked too


this is what I have (this is a lab):



track 10 rtr 1 reachability

!

track 20 rtr 2 reachability

!

ip route 10.0.0.0 255.255.0.0 172.16.1.1 track 10

ip route 10.0.0.0 255.255.0.0 172.16.3.1 track 20

ip route 201.1.1.0 255.255.255.0 172.16.1.1 track 10

ip route 201.1.1.0 255.255.255.0 172.16.3.1 track 20

!

!

ip sla 1

icmp-echo 201.1.1.2 source-ip 192.168.1.20

timeout 1000

threshold 50

frequency 1

ip sla schedule 1 life forever start-time now

ip sla 2

icmp-echo 201.1.1.3 source-ip 192.168.1.20

timeout 1000

threshold 50

frequency 1

ip sla schedule 2 life forever start-time now

!

!



So my question is if there is a command that help me getting up tracked static routes so ip sla can reach a successful ping

and the value in the show track brief output displays up


Router#show track brief

Track Object Parameter Value Last Change

10 rtr 1 reachability Down 00:11:57

20 rtr 2 reachability Down 00:11:57


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tstanik Thu, 10/09/2008 - 08:12
User Badges:
  • Bronze, 100 points or more

To display information about the IP route track table, use the show ip route track-table command in privileged EXEC mode.

show ip route track-table

The following example displays information about the IP route track table:

i.e.

Router# show ip route track-table

ip route 0.0.0.0 0.0.0.0 10.1.1.242 track-object 123 state is [up]


Here is the show ip route track-table Field Descriptions

ip route for the The configured IP route.

track-object for the The track object number.

state is for the The state of the track object. The object may be up or down.



Actions

This Discussion