I'm not sure what I'm missing here, but I'm trying to trunk a L2 2950 switch with a L3 3550 switch.
Ports 1 on each switch are the trunk and I am using a crossover cable.
The 2950 switch looks after VLAN29
The 3550 switch looks after VLAN35
On the L3 3550 I have created:
ip address 192.168.2.1 255.255.255.0
ip address 192.168.3.1 255.255.255.0
I have a PC2 in port 9 of the 2950 on IP 192.168.2.51/24 and it's gateway as 192.168.2.1
I have a PC1 in port 11 of the 3550 on IP 192.168.3.2/24 gateway 192.168.3.1.
PC1 on the 3550 can only ping 192.168.3.1 and nothing on the 192.168.2.x/24 VLAN29 range.
PC2 on the 2950 can ping 192.168.2.1, 192.168.3.1 only.
3550 can ping all - 192.168.3.1, 192.168.3.2, 192.168.2.1, 192.168.2.51.
Why can't PC 1 ping anything on the L2 2950. I just want the 2 VLAN's to talk to each other.
Hope I have given you enough info.