VPN Client Behind 3 Cisco Firewalls

jafarsadiq · ‎10-05-2008

Dear Experts,

I have a setup, in which the LAN Users have to establish a IP-Sec VPN to a remote ASA with public IP. But, the Users have to cross 1 FWSM and 2 ASA's to reach the Internet and no access restrictions are done. I mean, IP ANY ANY... NAT'ing is done on the Edge Internet Router. The Issue is , the Cisco VPN Client doesnot connect.

Please pass your suggestion, if this is a known issue..

thanks

Jafy

Marwan ALshawi · ‎10-05-2008

have a look at the following link might help/guid u

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Firewalling&topicID=.ee6e1fa&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc119e7/3#selected_message

good luck