Hi, I have a Cisco 2650 running:
IOS C2600-BINS-M), Version 12.2(13)T4.
Installed is NM2V
VIC-2FXO-EU Ports 1/0/0 & 1/0/1
VIC-2FXS ports 1/1/0 & 1/1/1
I can use an analogue phone in port 1/1/0 and get dial tone. I try in 1/1/1 and no dial tone. Hardware seems OK from diags etc.
Checked around and see note from cisco at http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml
This states that "Port zero on the VIC-2FXS card is designed to accommodate a United States style two-line phone, instead of the usual European style one-line phone" and that certain cable configs can cause issues. I tried the suggestion of a straight thru 2 wire (3&4) RJ11 cable with no joy, I have one 4-wire cable pinned as 2<->5 and 3<-4> which gives me working port at 1/1/0 but nowhere else, no other cable I have tried will work. My question is, can I actually get both ports to work with a known cable config, or am I limited to the one port on the VIC-2FXS without a US 2 line analogue phone?
Sorry this is so long, many thanks for taking the time to look.