Cisco Security Manager Perfomance Monitor 3.2.1 generate strange message

Unanswered Question
Oct 6th, 2008
User Badges:

This message generate periodicly:


FaultId: 27

DeviceId: 450



MO: Device

Change: Device is not accessible via HTTPS - Either the credentials are incorrect or Https may not be enabled on the device

ChangeSeverity: P1

StateChange: Device Accessible via Https is Down

AlarmState: Active

OverallSeverity: P1

DeviceType: Firewall


But device still accessebel by HTTPS. I see there are no timeout configure by HTTP access (only SNMP timeout).

PS. Device successuful import to PM. And I recive a messages from this device.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bwilmoth Fri, 10/10/2008 - 12:24
User Badges:
  • Silver, 250 points or more

MCP uses HTTPS for periodic polling to Firewall, the interval may vary

depends on the default polling interval ( default 5min ) and the size of the network.If you think this unreachable event is due to netowork cogestion or intermittent problems.

Then you can use the following steps:

1. Admin->Events->Firewall

2. Select "Device Accessible" , click 'Thresholds'.


This Discussion