10-06-2008 03:48 AM - edited 03-11-2019 06:53 AM
Dear all
i have an ASA 5520 in my company and it is working fine , all the users can access internet through it . i faced a problem that when trying to use the vpn client S/W which installed on my pc to connect to remote networks from my company , i found that the vpn tunnel is established successfully and in the system tray i noted that the vpn client is connected .
But when trying to access any device in the remote networks , i failed. I tried to ping any device or server but it failed . Also i tried to connect to any server using remote desktop , but it failed.
From my home i can access these remote networks properly without any problems through my ADSL line .
i cannot detrmine where the problem is .
please i need your advice.
please find the attached file for ASA config.
regards
Mohamed
10-06-2008 04:21 AM
"isakmp nat-traversal 10" needs to be enable
on the remote VPN device. That way, it can
detect if your system is behind a NAT device.
10-06-2008 05:27 AM
Thanks dear for your reply.
i need to know that it is necessary to add this command in my ASA also or just the remote vpn device ??
regards
10-06-2008 05:45 AM
just the remote VPN device. You do NOT have to
do anything on your ASA.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide