basic pptp 501 6.3

Answered Question
Oct 6th, 2008

I am attempting to permit a "inside" user who is assigned IP 10.0.0.5 to PPTP to an outside vendor's web server.

can I use "sysopt connection permit-pptp" by itself, or can I use "fixup on port 1723"?

thank you,

wr t

Building configuration...

: Saved

PIX Version 6.3(5)

interface ethernet0 auto

interface ethernet1 100full

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password encrypted

passwd encrypted

hostname MJSFW

domain-name macejacobs.com

fixup protocol dns maximum-length 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol skinny 2000

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names

access-list outside_access_in permit tcp any any eq 3389

pager lines 24

icmp deny any outside

mtu outside 1500

mtu inside 1500

ip address outside "outside ip" 255.255.255.252

ip address inside 10.0.0.1 255.255.255.0

ip audit info action alarm

ip audit attack action alarm

pdm history enable

arp timeout 14400

global (outside) 10 interface

nat (inside) 10 10.0.0.0 255.255.255.0 0 0

static (inside,outside) tcp "outside ip" 3389 10.0.0.3 3389 netmask 255.255.255.255 0 0

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 "outside gateway" 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

no snmp-server location

no snmp-server contact

snmp-server community warn1ng

no snmp-server enable traps

floodguard enable

sysopt noproxyarp inside

telnet 10.0.0.3 255.255.255.255 inside

telnet timeout 5

ssh timeout 5

console timeout 0

terminal width 80

Cryptochecksum:

: end

[OK]

MJSFW(config)#

I have this problem too.
0 votes
Correct Answer by abinjola about 8 years 1 month ago

fixup protocol pptp 1723

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion