MGCP over WAN

Unanswered Question
Oct 7th, 2008
User Badges:

Hi,


I want to make VoIP calls between my Cisco Call Manager sited in Dublin and an NEC PBX sited in New York. In order to integrate them I am considering placing a Voice Gateway in New York and running a MGCP session over my WAN. The Round trip time over the WAN to New York is around 90 - 100 milliseconds. Will it be ok to run an MGCP session over this link?


Help rated.


Thanks



Gav

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
testeven Tue, 10/07/2008 - 08:29
User Badges:
  • Cisco Employee,

Hi Gav!


Yes you can use an MGCP GW for this scenario. There are 2 guides for interconnection a NEC with CCM, you can either use E1 or T1, but I think in this case it will be T1 as you are

connecting to NY:


*** Cisco 3640 Router - PBX Interoperability: NEC 2400 ICS PBX with CallManager Using E1 to an MGCP Gateway ***


www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/207459nc.pdf


*** Cisco 3640 Router - PBX Interoperability: NEC 2400 ICS PBX with Cisco CallManager using T1 to an MGCP Gateway ***


www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/207460nc.pdf


HTH!


Tere.

Actions

This Discussion