VG224 Analog fax

Unanswered Question
Oct 7th, 2008
User Badges:

What is the command to reset voice ports on a vg224? I know the shut/no shut commands. But I need the command to interface to a port so that I may issue the shut/no shut. Any assistance would be great!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chad Stachowicz Tue, 10/07/2008 - 07:37
User Badges:
  • Silver, 250 points or more

You can just do a reset from call manager and it will solve this... What protocol is the VG224? If it is SCCP this should do the trick...


Cheers,


Chad

burgessf Tue, 10/07/2008 - 07:43
User Badges:

Thanks, Chad. The issue is that some numbers on the VG224 are giving a "fast busy" signal when dialed. I have attempted to reset the gateway and the port from the Call Manager console (4.1(3)r6a). and I tried the reload command from the CLI. Do you have anymore suggestions? Thanks!

Chad Stachowicz Tue, 10/07/2008 - 07:52
User Badges:
  • Silver, 250 points or more

Well I can only imagine if you tried all that, its either a class of service issue within the call manager itself, or possibly there is a punch down problem?


Chad

burgessf Tue, 10/07/2008 - 07:55
User Badges:

that is a possiblity. But, I would like to try the CLI command that allows me interface to the port so that I can reboot it from the CLI. I failed to mention that it is a MGCP gateway. Thanks for your responses.

Chad Stachowicz Tue, 10/07/2008 - 07:58
User Badges:
  • Silver, 250 points or more

if you already reloaded the router, then that reset all the ports anyways.. the shut no shut on the voice-port is as you said the other options...


Chad

Actions

This Discussion