10-07-2008 06:42 AM - edited 03-15-2019 01:47 PM
What is the command to reset voice ports on a vg224? I know the shut/no shut commands. But I need the command to interface to a port so that I may issue the shut/no shut. Any assistance would be great!
10-07-2008 07:37 AM
You can just do a reset from call manager and it will solve this... What protocol is the VG224? If it is SCCP this should do the trick...
Cheers,
Chad
10-07-2008 07:43 AM
Thanks, Chad. The issue is that some numbers on the VG224 are giving a "fast busy" signal when dialed. I have attempted to reset the gateway and the port from the Call Manager console (4.1(3)r6a). and I tried the reload command from the CLI. Do you have anymore suggestions? Thanks!
10-07-2008 07:52 AM
Well I can only imagine if you tried all that, its either a class of service issue within the call manager itself, or possibly there is a punch down problem?
Chad
10-07-2008 07:55 AM
that is a possiblity. But, I would like to try the CLI command that allows me interface to the port so that I can reboot it from the CLI. I failed to mention that it is a MGCP gateway. Thanks for your responses.
10-07-2008 07:58 AM
if you already reloaded the router, then that reset all the ports anyways.. the shut no shut on the voice-port is as you said the other options...
Chad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide