10-07-2008 02:33 PM - edited 03-03-2019 11:49 PM
How do I enable a WS-X6748-GE-TX in a 6506 with SUP720 MSFC3A?
10-08-2008 12:28 AM
Dan
Not sure what you mean by "enable". The 6500 linecards are hot swappable so you can just insert the card into a spare slot in the chassis and it should be available to configure.
Are you having problems getting the switch to recognise the module ? If so it could be your IOS version.
Jon
10-08-2008 07:14 AM
The module is recognized in the sh Mod, but gets disable by an exception "PM_SCP-SP-1-LCP_FW_ERR: System resetting module 2 to recover from error: Linecard received system exception. Errcode =
2409000001"
10-08-2008 07:18 AM
Dan
You could try reseating the module but if it is recognised initially and there is enough power for it it looks like a hardware fault i'm afraid.
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: