Solved: What is a sysbol error?

jkeeffe · ‎10-08-2008

In the output below there are 38 Symbol-Errs. What do they refer to?

ROC-6509-AS-C#sh int g7/43 counters errors

Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards

Gi7/43 0 0 0 2 0 0

Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants

Gi7/43 0 0 0 0 0 2 0

Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err

Gi7/43 0 0 0 0 38

rmcarthur · ‎10-09-2008

Gig ethernet uses 10 bit encoding instead of 8 bit. These 10 bit codes are referred to as symbols. Symbol errors can occur due to dirty fibre, noisy lines or, rarer, a hardware problem.

Unless they are increasing fairly quickly or regularly they are not a cause for concern.

Clear the counters, check your connections and monitor the situation.

Hope this helps.

View solution in original post

rmcarthur · ‎10-09-2008

Gig ethernet uses 10 bit encoding instead of 8 bit. These 10 bit codes are referred to as symbols. Symbol errors can occur due to dirty fibre, noisy lines or, rarer, a hardware problem.

Unless they are increasing fairly quickly or regularly they are not a cause for concern.

Clear the counters, check your connections and monitor the situation.

Hope this helps.