Cisco 3640 | WCCP v2 | Barracuda Web Filter 410 | Trouble

Unanswered Question
Oct 8th, 2008
User Badges:

I have a client with a Cisco 3640 Router running 12.3(13a) IP base IOS using WCCP v2 to send web traffic to a Barracuda Web Filter 400. They have now requested that all of the intranet traffic be removed from the logs. The way I understand this is that an ACL can be created to prevent WCCP from sending http traffic to the filter therefor bypassing the Barracuda logs. Below is what I have but for some reason it is not working.

interface FastEthernet0/0

ip address

ip wccp web-cache redirect out

ip route-cache same-interface

ip wccp web-cache redirect-list 99 group-list 98

access-list 90 permit

access-list 99 deny

access-list 99 deny

access-list 99 deny

access-list 99 permit any

ip route

Please let me know if you need any additional information

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
drolemc Tue, 10/14/2008 - 12:25
User Badges:
  • Silver, 250 points or more

I think there is some problem in your configuration.

Please verify these two configurations.

1. Sets the access list used to enable redirection

ip wccp web-cache redirect-list access-list

2. Indicates to the router which IP addresses of cache engines to accept packets from.

ip wccp web-cache group-list access-list

For further information click this link.


This Discussion