Cisco CallManager 4.1.3 sr6a with Codian/Tandberg ISDN Gateway

Unanswered Question

Hello everyone,


I am running CCM 4.1.3 sr6a and I am trying to integrate a Codian/Tandberg ISDN gateway to CCM and I running into this weird issue, hope someone can help !!


- The Codian/Tandberg ISDN gateway itself has a built-in auto attendant and I've configured the ISDN gateway in CCM as an H.323 gateway and I can dial to the AA on the ISDN gateway by dialing a 4-digit extension from my video enabled phone but for some reason I am not getting the audio stream from the AA when dialing by 4-digit extension. But if I dial by IP address from a Tandberg video endpoint by passing CCM then it works, I get both video and audio streams. So I am suspecting there is something that is not right during call setup when CCM is involved.


Any suggestions / inputs is highly appreciated !!! Thank you all very much in advance !!!


Danny



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion