SRST across 2 gateways

Answered Question
Oct 8th, 2008
User Badges:

Does anyone have any experience or documentation regarding the process of splitting SRST duties between 2 same site routers? I have a customer with a remote location and they would like to have SRST at this location - 800+ employees. I have heard there is a method by which you can split the SRST registrations between 2 gateways in order to surpass the 730 ephone limitation of one gateway.

Correct Answer by Marwan ALshawi about 8 years 8 months ago

ok the trick here is to put lets say half users in one device pool and others in other device pool then,creat two srst deffenetions

then fo each device pool assigne one of the gateways as the SRST router regarding its the router or gateway IP address

which should be the same as the ip address set with ip source add x.x.x.x under the srst config


simple :)

good luck


if helpful Rate



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Correct Answer
Marwan ALshawi Wed, 10/08/2008 - 17:35
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

ok the trick here is to put lets say half users in one device pool and others in other device pool then,creat two srst deffenetions

then fo each device pool assigne one of the gateways as the SRST router regarding its the router or gateway IP address

which should be the same as the ip address set with ip source add x.x.x.x under the srst config


simple :)

good luck


if helpful Rate



gbwatkins Wed, 10/08/2008 - 17:36
User Badges:

Thank you. I was planning on doing that however someone told me this was now a feature function of IOS - guess I was misinformed.


Cheers!

Marwan ALshawi Wed, 10/08/2008 - 17:44
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

good luck


if helpful Rate please,

Actions

This Discussion