MPLS VPN over Ipv6

Answered Question
Oct 9th, 2008
User Badges:

I am trying to implement MPLS VPN's with IPV6. This is what I want:

1) There should not even be a single IPv4 address on the network.

2) Amongst P and PE's I want to use OSPF v3 for the distribution of labels.

3) Do the normal MP-BGP between PE's.


Is it possible to do it without any IPv4 on the core n/w.

If so then can someone gve me some links on how do I go about doing them.

Correct Answer by Giuseppe Larosa about 8 years 9 months ago

Hello Saurav,

as far as I know this is not possible up to now.


6VPE allows to have VPNv6 over an MPLS/IPv4 core


see


Restrictions for Implementing IPv6 VPN over MPLS


6VPE supports an MPLS IPv4-signaled core. An MPLS IPv6-signaled core is not supported


http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ov_mpls_6vpe.html#wp1054029


Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Thu, 10/09/2008 - 13:23
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Saurav,

as far as I know this is not possible up to now.


6VPE allows to have VPNv6 over an MPLS/IPv4 core


see


Restrictions for Implementing IPv6 VPN over MPLS


6VPE supports an MPLS IPv4-signaled core. An MPLS IPv6-signaled core is not supported


http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ov_mpls_6vpe.html#wp1054029


Hope to help

Giuseppe


dara111983 Thu, 10/09/2008 - 22:09
User Badges:

yes,


The LDP extensions yet don't have support for distributing the labels for the IPV6 prefixes.




Thanks,

Dara

saurav.khanna Wed, 10/15/2008 - 10:40
User Badges:

Yeps agreed I read it again and it seems the LDP is not supported with IPv6 thanks for replying. :-)



Actions

This Discussion