line protocol is down VSS SUP 720 10 G

Unanswered Question
Oct 9th, 2008
User Badges:

Dear tech experts

I have 2 cat 6509 switch with sup 720 10G

I have formed VSS in this switches in redundant mode working fine.

after testing when I connect my PC in any one of the cat 6509 and assign access port line protocol shows down

2. I have connected the edge switch in 6509 inand I made trunk with the cat 6509 switch

but still ethernet line protocl down

Please shower all your inputs so my PC or edges switches can work with this

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dabels Thu, 10/09/2008 - 11:01
User Badges:

can you cut and past a show interface for the port that you connect your pc to? also a show run int (and that interface number ) would help as well...

samerhabbouch Fri, 10/10/2008 - 00:45
User Badges:

Dear dabels

thanks for caring

core 1

switch virtual domain 100

switch 1

int port-channel 1

switch virutal link1

int gi5/4-5

channel group 1 mode on

no sh

VSS with othher peer working with this commands

now the interface config for the pc

int gi1/1/1

switch port mode access

switch port access vlan 230

no shut

pc line protocol never comes up

please see attach ment as well

dabels Fri, 10/10/2008 - 04:50
User Badges:

Have you added vlan 230 to the config?? looks like this may be your problem. in config mode type int vlan 230 enter and then you can do a ctrl z and then check it.


This Discussion