Shaping / Quota

Unanswered Question
Oct 9th, 2008
User Badges:

Hi,

Our topology consists of 1x 3700 trunk to 8x 3560 switch stack. We use VLANs per department with different network address per VLAN.


Basically, we want to shape a specific VLAN to a speed once they reach a quota (10Gig download)...

Is this possible running a simple network?


We are using 3700 Software (C3725-ADVSECURITYK9-M), Version 12.4(7c) and Cisco standard IOS on our switch stack.


Otherwise, I may have to use time-range QOA to shape traffic on specific time of the day.


Thanks

Peter

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
naveen_b81 Fri, 10/10/2008 - 04:48
User Badges:

I am not aware of a mechanism which can do it on basis of a total quota, but we can shape it based on the rate of transfer (which will be a good way) on congested interfaces. Also you can probably calculate the rate based on download allowed per day and allow the same.


check http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml#policingvsshaping


it might be useful.


Cheers,

Naveen B

Peter Valdes Sun, 10/12/2008 - 16:04
User Badges:

Hi Naveen,

Thanks, I thought so.

I know it requires 3rd party application to set quota.

Ill check the document you posted.


Thanks

Peter

Actions

This Discussion