10-10-2008 05:07 AM - edited 07-03-2021 04:36 PM
Hello,
On the controller, when you look at an access points config. There is the syslog server for the access point with the default ip address of 255.255.255.255. I was wondering if there was any way to disable the syslog server for the access points. The only thing I've found so far is that the ip address of the syslog server can be changed.
Thanks,
10-16-2008 10:35 AM
To remove a syslog server, use the no logging host global configuration command, and specify the syslog server IP address. To disable logging to syslog servers, enter the no logging trap global configuration command.
01-06-2009 11:19 PM
i am not sure if "no" command works.
but on 5.2 ver
config logging trap disable global
disbale/ enable is the key to set the ip address for syslog server
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide