Outside Interface IP address

Unanswered Question
Oct 10th, 2008
User Badges:

I woder if using ASA or PIX, can I set up the outside interface with 1 IP then for outgoing (on the same outside interface) with another IP address. For example: outside IP 1.2.3.4 then somehow for outgoing(return traffic if you will) the IP address to be visible is 1.2.4.5 (partner requirement, don't ask :) ).

Doing this on Linux iptable already and now is thinking to change it out to something else,i.e. ASA or PIX.

Thank you for your hep.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
suschoud Fri, 10/10/2008 - 09:53
User Badges:
  • Gold, 750 points or more

use :



nat (inside) 1 0 0

global (outside) 1 1.2.4.5


All outbound traffic will be translated to 1.2.4.5


If you use ;


global (outside) 1 interface


Interface ip will be used for xlation purpose.





Do rate helpful posts.



Regards,

Sushil

Actions

This Discussion