10-10-2008 09:43 AM - edited 03-11-2019 06:56 AM
I woder if using ASA or PIX, can I set up the outside interface with 1 IP then for outgoing (on the same outside interface) with another IP address. For example: outside IP 1.2.3.4 then somehow for outgoing(return traffic if you will) the IP address to be visible is 1.2.4.5 (partner requirement, don't ask :) ).
Doing this on Linux iptable already and now is thinking to change it out to something else,i.e. ASA or PIX.
Thank you for your hep.
10-10-2008 09:53 AM
use :
nat (inside) 1 0 0
global (outside) 1 1.2.4.5
All outbound traffic will be translated to 1.2.4.5
If you use ;
global (outside) 1 interface
Interface ip will be used for xlation purpose.
Do rate helpful posts.
Regards,
Sushil
10-10-2008 10:06 AM
Thank you, will try that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide