I have a an analog port on a CME system that I need to connect a Pitney Bowes postage machine on. I configured the port with the commands below and I have tested with an analog phone and can make an receive calls. However, when the PB uses it modem to call out it reports "no carrier" and cannot connect. What else do I need to do to get the modem to work?
Thanks,
Diego
!
voice-port 0/0/2
timeouts ringing infinity
description Pitney Bowes
!
!
dial-peer voice 3 pots
description Pitney Bowes
service stcapp
port 0/0/2
!
!
ephone-dn 36
number 227
label 227
description Pitney Bowes
name Pitney Bowes
!
!
ephone 3
device-security-mode none
mac-address E4A2.5C4C.0002
ephone-template 1
type anl
button 1:36
!