Solved: forward inbound calls to AA

fredj1234 · ‎10-12-2008

Hi,

I'm using a UC520 and I'm trying to route inbound calls from PSTN --> FXO ports to the CUE Autoattendant.

It was my understanding that you could do this:

voice-port 0/0/0

connection plar opx extensionNumberHere

end

This doesnt seem to be working though. How would you configure an inbound dail-peer forwarding calls to a particular extension? I'm not sure on the best approach to resolve this problem.

What else could I try?

Thanks,

-Fred

Marwan ALshawi · ‎10-12-2008

have a look at the following link will help u it is a case i have address similer to urs

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc18c07/0#selected_message

if helpful Rate

View solution in original post

Marwan ALshawi · ‎10-12-2008

have a look at the following link will help u it is a case i have address similer to urs

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc18c07/0#selected_message

if helpful Rate