QoS - CoS 1812

Unanswered Question
Oct 13th, 2008
User Badges:

Hi all,

i need to setup a 1812 with the following configuration:


- fastethernet 1 e 2 trunk with vlan 10,20,30,40


- fastethernet 3 with vlan 10 in access mode and Priority 3

- fastethernet 4 with vlan 20 in access mode and priority 4

- fastethernet 5 with vlan 30 in access mode and Priority 5

- fastethernet 6 with vlan 40 in access mode and priority 6


I didn't find any info for configure QoS on Cisco1812.

Is this possible?


Thanks in advanced


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
d.rocco Mon, 10/13/2008 - 05:13
User Badges:

I found how to:

put the following command under the interface:

"switchport priority default 3"



interface FastEthernet2

switchport priority default 3

end



router#sh inter fast 2 switchport

Name: Fa2

Switchport: Enabled

Administrative Mode: static access

Operational Mode: down

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: Disabled

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Trunking VLANs Enabled: ALL

Trunking VLANs Active: none

Protected: false

Priority for untagged frames: 3

Override vlan tag priority: FALSE

Voice VLAN: none

Appliance trust: none

router#


Diego


Actions

This Discussion