10-13-2008 08:46 PM - edited 03-03-2019 11:54 PM
can u help me to configure inter vlan between a router and switch .
10-13-2008 08:49 PM
10-13-2008 09:33 PM
hi ohassairi
that linkwas good but i want to know in details.can u send me details config.its very urgent
10-13-2008 10:00 PM
in the switch:
3524xl(config)#int fastEthernet 0/48
3524xl(config-if)#switchport trunk encapsulation dot1q
3524xl(config-if)#switchport mode trunk
3524xl(config-if)#switchport trunk allowed vlan all
3524xl(config-if)#exit
3524XL#vlan database
3524XL(vlan)#vlan 2 name cisco_vlan_2
3524XL(vlan)#exit
APPLY completed.
3524XL#configure terminal
3524XL(config)#interface fastEthernet 0/2
3524XL(config-if)#switchport access vlan 2
3524XL(config-if)#exit
3524XL(config)#interface fastEthernet 0/3
3524XL(config-if)#switchport access vlan 2
3524XL(config-if)#end
in the rtr:
interface FastEthernet0/0
no ip address
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 10.10.10.1 255.255.255.0
!
interface FastEthernet0/0.2
encapsulation dot1Q 2
ip address 10.10.11.1 255.255.255.0
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: