10-13-2008 11:58 PM - edited 03-03-2019 11:55 PM
Dear all
I have access server who many users connect to it. by the way all of users will be authenticated via cisco acs.
I want to implement a solution to assign 64K bandwith to each user. I mean dedicatd bandwidth. I tried Class-map and police but the mistake is that it is not possible to assign dedicated for each user.
please guide me
10-14-2008 01:08 AM
Amir,
Just so I am clear on what you are trying to do. You want to apply QoS on remote VPN users?? In which direction?? REMEMBER you can only apply QoS outbound - going to the user.
HTH>
10-14-2008 02:22 AM
dear andrew
my vpn users are in lan side and the reason for vpn connections are internet access.
please inform me for suitable solution
regards
10-14-2008 02:35 AM
You want to limit the amount of badnwdith a VPN user uses on the internet????
Where do the VPN's terminate? Where is the internet access? Do you have a diagram of what you are trying to do?
10-14-2008 02:40 AM
the diagram look like this:
user-->router(VPN established)-->Internet
each user from LAN for internet access should establish a vpn connection the router will Authenticate it with cisco ACS if user is authenticated then it has internet access.
I want to limit each user bandwidth for internet connectivity
regards
10-14-2008 02:43 AM
I do not have a clue how you would do this.
I would be interested in the solution, if it's at all possible. Perhaps another netpro can help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: