cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
400
Views
2
Helpful
2
Replies

ASA 5510 Trying to setup DMZ and Internal--external traffic.

risenshine4th
Level 1
Level 1

I'm trying to find a great configuration guide. I'm in the process of migrating from a Netscreen 10. I've setup my ASA according to the documentation available for the ASA version 8.0 and used ASDM version 6.1 as well.

I can ping out of the interfaces from the Management IP. I am unable to pass any normal traffic in any direction.

I opened all interfaces to an any, any, any rules without success both inbound and outbound on all interfaces.

Anyone have a great book recommendation?

2 Replies 2

Thanks for the book suggestions. Any one better than another?

The current Network is up and running on a Netscreen 10. I'm trying to swap it out with an ASA 5510 to increase throughput.

I've left out all the VPN's on purpose...I'm justing trying to get the DMZ, WEB, Mail, and internet browsing working first.

I've not been able to get any traffic to flow in any direction when I swap the Firewalls and Test.

I've attached a clean config with dummy IP's

I have External of 172.16.1.0 255.255.255.0

I have Internal of 192.168.0.0 255.255.255.0

I have a DMZ of 192.168.154.1 255.255.255.0

I have 4 external web addresses 172.16.1.8,

172.16.1.135, 172.16.1.136, and 172.16.1.207

These are mapped to Internal or DMZ addresses.

172.16.1.135 depending on the port forwards to either a DMZ(http, Domain) address of 192.168.154.6 or Internal(Https,SMTP) 192.168.0.4

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: