10-14-2008 05:22 PM
Hello everybody,
I have an ASA 5510 and want to get your of expert advice on how to allow remote access using Microsoft VPN connection using PPTP.
Below is the Access-list I added to my ASA:
access-list Cedarhurst extended permit ip host 10.223.14.92 host 96.57.10.226
access-list Cedarhurst extended permit tcp host 10.223.14.92 eq pptp host 96.57.10.226
After adding this access control entry the windows XP client using Microsoft VPN client still cannot connect to a Microsoft SBS VPN server.
Any advice is greatly appreciated.
10-14-2008 06:25 PM
If your PPTP server is inside behind asa you will need to allow GRE protocol 47 in your acl.
have a look here
PLS rate any helpful post
Rgds
Jorge
10-15-2008 08:21 AM
Thanks Jorge, I will try and let you know what happens.
--chie
10-15-2008 02:24 PM
You're welcome, you should be good if you follow the link, but let us know either way.
Rgds
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: