A customer with a shared office wants to limit the traffic out to the internet for all his customers. They have a 4m link at present.
He wants one customer to have 1.75 meg only another to have .25meg and the rest to share the other 2m between them.
The switch that is doing this is a Cat 3560. They way that was first thought to do this was with a rate limit policy on the VLANS for the customers with the specific sizes and then a policy map for all the others. The config I have done is above.
The traffic for all customers is coming in from a netgear switch which is then trunked (dot1q) to the Cisco switch. Then there is an outbound connection to a sonic firewall.
The issue I have is that there doesn't seem to be any traffic going across the VLANS ( see doc above ) so the rate control command doesn't seem to work.
VLANS 5 and 8 have the fixed rate limit command as you will see in the config