Voice Gw And E1

Unanswered Question
Oct 15th, 2008

Hello

I use cisco 2811 with ios

c2800nm-ipvoice_ivs-mz.124-15.T7.bin

and istall 3 e1 wic

i have a problem with one way voice call

i mean then i call from our side to mobile everything is ok but then call became from bomile i have very bad voice

can anybody help me what can i do ?

to resolve this problem

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
allan.thomas Wed, 10/15/2008 - 08:04

Firstly, you refered to both one way voice, and very bad voice? Is it one or the other? Can you reproduce the problem everytime the calling party is the Mobile?

Rather that test incoming and outgoing to Mobile numbers as these can produce mixed results, verify whether you have similar problems with local dialling?

Call a local number, and then call in from the local number, do you still have the same problems?

If the later it could be one of two things either the integrity of the E1, errors, line-slips etc, or QoS

Rgds

Allan.

Actions

This Discussion