cable-diagnostic tdr test

Unanswered Question
Oct 15th, 2008
User Badges:

can someone please explain the channel significance on these test? one port shows A, B, C, D and the other B, A, D, C



TDR test last run on: October 15 10:06:10

Interface Speed Pair Cable length Distance to fault Channel Pair status

--------- ----- ---- ------------------- ------------------- ------- ------------

Gi13/5 1000

1-2 57 +/- 20 m N/A Pair B Terminated

3-6 54 +/- 20 m N/A Pair A Terminated

4-5 59 +/- 20 m N/A Pair D Terminated

7-8 55 +/- 20 m N/A Pair C Terminated


TDR test last run on: October 15 10:07:14

Interface Speed Pair Cable length Distance to fault Channel Pair status

--------- ----- ---- ------------------- ------------------- ------- ------------

Gi10/12 auto

1-2 18 +/- 6 m N/A Pair A Terminated

3-4 18 +/- 6 m N/A Pair B Terminated

5-6 19 +/- 6 m N/A Pair C Terminated

7-8 19 +/- 6 m N/A Pair D Terminated




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
owillins Tue, 10/21/2008 - 06:17
User Badges:
  • Silver, 250 points or more

The Channel field was added to display the pair designation. The

pairs are named based on the transmission channel in use (as per IEEE

specification clause 40.8)

MDI:

Pair A: Pins 1 and 2

Pair B: Pins 3 and 6

Pair C: (if used) Pins 4 and 5

Pair D: (if used) Pins 7 and 8

MDIX:

Pair A: Pins 3 and 6

Pair B: Pins 1 and 2

Pair C: (if used) Pins 7 and 8

Pair D: (if used) Pins 4 and 5


Actions

This Discussion