asa 5520 eigrp redistribute default route

pkikodze1 · ‎10-16-2008

Hello

I have asa 5520 and i need redistribute defailt route with eigrp but asa do not redistribute default route is this possible from asa i have this config

router eigrp 10

no auto-summary

distribute-list eigrp-distribution out interface outside

distribute-list eigrp_core out interface inside

network 192.168.50.0 255.255.255.0

network 0.0.0.0 0.0.0.0

redistribute connected

redistribute static route-map DISTRIBUTE-STATIC

route-map DISTRIBUTE-STATIC permit 10

match ip address DISTRIBUTE-STATIC

access-list DISTRIBUTE-STATIC line 1 standard permit host 0.0.0.0 (hitcnt=5

singhsaju · ‎10-17-2008

Do you see default route in the EIGRP topology table?

Post relevant output of topology table

show ip eigrp topology

HTH

Saju

Pls rate helpful posts

pkikodze1 · ‎10-17-2008

i have this default route

P 0.0.0.0/0, 1 successors, FD is 1536

via Summary (1536/0), Null0

singhsaju · ‎10-17-2008

Hi ,

As per link below , default route is automatically redistributed into EIGRP

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008086ebd2.shtml

If you remove "redistribute static" do you still see that entry in the topology table ?

HTH

Saju

pkikodze1 · ‎10-18-2008

yes i have still this entry

P 0.0.0.0/0, 1 successors, FD is 1536

via Summary (1536/0), Null0