10-16-2008 01:02 AM - edited 02-21-2020 03:03 AM
Hello
I have asa 5520 and i need redistribute defailt route with eigrp but asa do not redistribute default route is this possible from asa i have this config
router eigrp 10
no auto-summary
distribute-list eigrp-distribution out interface outside
distribute-list eigrp_core out interface inside
network 192.168.50.0 255.255.255.0
network 0.0.0.0 0.0.0.0
redistribute connected
redistribute static route-map DISTRIBUTE-STATIC
route-map DISTRIBUTE-STATIC permit 10
match ip address DISTRIBUTE-STATIC
access-list DISTRIBUTE-STATIC line 1 standard permit host 0.0.0.0 (hitcnt=5
10-17-2008 11:22 AM
Do you see default route in the EIGRP topology table?
Post relevant output of topology table
show ip eigrp topology
HTH
Saju
Pls rate helpful posts
10-17-2008 11:47 AM
i have this default route
P 0.0.0.0/0, 1 successors, FD is 1536
via Summary (1536/0), Null0
10-17-2008 12:44 PM
Hi ,
As per link below , default route is automatically redistributed into EIGRP
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008086ebd2.shtml
If you remove "redistribute static" do you still see that entry in the topology table ?
HTH
Saju
10-18-2008 02:14 AM
yes i have still this entry
P 0.0.0.0/0, 1 successors, FD is 1536
via Summary (1536/0), Null0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide