10-16-2008 01:29 AM - edited 03-03-2019 11:56 PM
I have a Cisco Routers LAP
one of my trained students puts by mistake on a router Configuration Register 0x1242
I can not now loggin in Router by console ( unfortunately no other ports configured to access )
what can we do to take it back ?
Regards,
Solved! Go to Solution.
10-16-2008 04:20 AM
Hello Ahmed,
the new settings has changed the console speed.
If you can access via telnet the LAP open a session and change it back to 0x2102
conf t
config-register 0x2102
otherwise via console try with:
1200 bps
2400 bps
4800 bps
115000 bps
one of these should be the new speed
Hope to help
Giuseppe
10-16-2008 04:20 AM
Hello Ahmed,
the new settings has changed the console speed.
If you can access via telnet the LAP open a session and change it back to 0x2102
conf t
config-register 0x2102
otherwise via console try with:
1200 bps
2400 bps
4800 bps
115000 bps
one of these should be the new speed
Hope to help
Giuseppe
10-16-2008 12:49 PM
Hello,
I've found a reference:
bits 11 and 12
11-12 0x0800 to 0x1800 Console line speed:
[12/11] Hex Baud
00 0x0000 9600
01 0x0800 4800
10 0x1000 1200
11 0x1800 2400
Hope to help
Giuseppe
10-27-2008 08:58 AM
Thank You my friends
It works at 1200
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: